Reply To: QOS Question (Updated)

Home Page Forums Network Management ZeroShell QOS Question (Updated) Reply To: QOS Question (Updated)

#45633
dingaling
Member

thanx for clearing that up fulvio.

But i still am having some issues.

In the QOS statistics, some of my QOS classes are showing 0 bytes of activity.
This would indicate that there is no QOS happening on traffic that isnt there?

Even simple port 80 for web browsing doesnt appear to show any activity, it did count a few bytes on one of the interfaces.

Also i notice the layer 7 filters for ventrillo and SIP are not registering any traffic in the QOS statistics. The voip phone i have tried to classify a few different ways (by IP, but MAC, by port, by l7 filter) and it doesnt seem to count any traffic, and cuts out when downloads are taking place.

see attached image:

My classifications look like this:
1 * * MARK udp opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp spt:5060 dpt:5060 MARK set 0xb VOIP no
2 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto ventrilo MARK set 0xb VOIP no
3 * * MARK tcp opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp spt:80 MARK set 0x15 WEB no
4 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto flash MARK set 0x15 WEB no
5 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto bittorrent MARK set 0xf BULK no
6 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 ipp2p v0.8.2 –kazaa –gnu –edk –dc –bit LAYER7 l7proto bittorrent MARK set 0x12 BULK no
7 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto ftp MARK set 0x12 BULK no
8 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto smtp MARK set 0x12 BULK no
9 * * MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 LAYER7 l7proto pop3 MARK set 0x12 BULK no
10 * * MARK tcp opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp spt:34085 MARK set 0x12 BULK no
11 * * MARK udp opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp spt:34085 MARK set 0x12 BULK no

Also i wonder if i should have NAT on/off in zeroshell if the adsl modem is doing NAT?

Also i notice everday on the zero console i have a “Bad EIP value”
something about Fixinf recursive fualty but reboot is needed”

seems to come up everyday. Maybe this is why my QOS is not working?

Kind Regards.