Thanks for the quick response. Now that I know that they do get detected and will operate they can be made to work.
The problem was that the system they were installed into and working will not run the ZeroShell software. It boots to the 3 item menu but will not continue and successfully run. It hangs shortly after the load to ram says it is successful.
I then put the Pro/100 into a brand new motherboard figuring that would allow me to at least test. It starts and runs the ZeroShell software just fine except that the Pro/100 card weren’t found. I never figured those cards wouldn’t even be recognized by that system.
Long story short, I’ll have to find and set up a system that both recognizes the cards and runs the software.