Re: 28 Jul 2014

Home Page Forums Network Management ZeroShell FS Issues Re: 28 Jul 2014

#53452

17:20:18 [ 5.524014] e1000e 0000:02:00.0: Disabling ASPM L0s L1
17:20:18 [ 5.524250] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
17:20:18 [ 5.524366] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
17:20:18 [ 5.524380] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
17:20:18 [ 5.524394] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
17:20:18 [ 5.536796] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
17:20:18 [ 5.536956] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
17:20:18 [ 5.541706] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf81a8000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
17:20:18 [ 5.541714] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
17:20:18 [ 5.541745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
17:20:18 [ 5.541899] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
17:20:18 [ 5.547363] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf81aa000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
17:20:18 [ 5.547372] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
17:20:18 [ 5.573831] iTCO_vendor_support: vendor-support=0
17:20:18 [ 5.577196] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
17:20:18 [ 5.581458] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
17:20:18 [ 5.584175] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
17:20:18 [ 5.647968] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
17:20:18 [ 5.647976] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
17:20:18 [ 5.647996] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
17:20:18 [ 5.648048] e1000e 0000:01:00.0: Disabling ASPM L0s L1
17:20:18 [ 5.648234] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
17:20:18 [ 5.648354] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
17:20:18 [ 5.648368] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
17:20:18 [ 5.648382] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
17:20:18 [ 5.707653] coretemp coretemp.0: Unable to read TjMax from CPU 0
17:20:18 [ 5.707682] coretemp coretemp.0: Unable to read TjMax from CPU 1
17:20:18 [ 5.766282] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
17:20:18 [ 5.766290] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
17:20:18 [ 5.766309] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
17:20:18 [ 6.630070] kjournald starting. Commit interval 5 seconds
17:20:18 [ 6.630107] EXT3-fs (sda1): mounted filesystem with ordered data mode
17:20:18 [ 6.727013] ISO 9660 Extensions: RRIP_1991A
17:20:18 [ 6.855134] EXT3-fs (sda4): error: unable to read superblock
17:20:18 [ 6.872877] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
17:20:18 [ 6.896973] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
17:20:18 [ 6.897291] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
17:20:18 [ 6.897305] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
17:20:18 [ 6.897312] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
17:20:18 [ 6.897318] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
17:20:18 [ 6.897324] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
17:20:18 [ 6.897328] UDF-fs: Rescanning with blocksize 2048
17:20:18 [ 6.897369] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
17:20:18 [ 6.897377] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
17:20:18 [ 6.897383] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
17:20:18 [ 6.897388] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
17:20:18 [ 7.002768] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
17:20:18 [ 7.186862] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
17:20:18 [ 7.519317] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
17:20:18 [ 36.480196] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
17:20:18 [ 38.217378] ip_tables: (C) 2000-2006 Netfilter Core Team
17:20:18 [ 38.396280] warning: `named’ uses 32-bit capabilities (legacy support in use)
17:20:18 [ 38.859260] ctnetlink v0.93: registering with nfnetlink.
17:20:28 [ 48.807005] Bridge firewalling registered
17:20:28 [ 48.844745] tun: Universal TUN/TAP device driver, 1.6
17:20:28 [ 48.844752] tun: (C) 1999-2004 Max Krasnyansky
17:20:28 [ 48.923218] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
17:20:29 [ 49.753327] r8169 0000:05:00.0: ETH00: link down
17:20:29 [ 49.753348] r8169 0000:05:00.0: ETH00: link down
17:20:29 [ 49.753873] ADDRCONF(NETDEV_UP): ETH00: link is not ready
17:20:30 [ 50.025027] r8169 0000:06:00.0: ETH01: link down
17:20:30 [ 50.025473] ADDRCONF(NETDEV_UP): ETH01: link is not ready
17:20:30 [ 50.146153] ADDRCONF(NETDEV_UP): ETH02: link is not ready
17:20:30 [ 50.273950] ADDRCONF(NETDEV_UP): ETH03: link is not ready
17:20:30 [ 50.333324] 8021q: 802.1Q VLAN Support v1.8
17:20:30 [ 50.333350] 8021q: adding VLAN 0 to HW filter on device ETH02
17:20:30 [ 50.333383] 8021q: adding VLAN 0 to HW filter on device ETH03
17:20:30 [ 50.343813] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
17:20:30 [ 50.451039] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
17:20:30 [ 50.569307] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
17:20:30 [ 50.649524] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
17:20:30 [ 50.733340] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
17:20:30 [ 50.829541] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
17:20:31 [ 51.428428] r8169 0000:05:00.0: ETH00: link up
17:20:31 [ 51.428727] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
17:20:32 [ 52.049003] ADDRCONF(NETDEV_UP): VPN00: link is not ready
17:20:32 [ 52.208411] ADDRCONF(NETDEV_UP): VPN99: link is not ready
17:20:32 [ 52.687679] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
17:20:32 [ 52.688304] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
17:20:32 [ 52.688890] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
17:20:32 [ 52.689479] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
17:20:32 [ 52.690069] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
17:20:32 [ 52.691176] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
17:20:32 [ 52.691924] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
17:20:32 [ 52.692718] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
17:20:35 [ 55.867671] NET: Registered protocol family 15
17:20:37 [ 56.990767] EXT4-fs (sdb1): re-mounted. Opts: (null)
17:20:42 [ 62.272947] ETH00: no IPv6 routers present
17:20:42 [ 62.800427] ETH03.90: no IPv6 routers present
17:20:43 [ 63.080127] ETH03: no IPv6 routers present
17:20:43 [ 63.192021] ETH03.10: no IPv6 routers present
17:20:43 [ 63.255958] ETH03.20: no IPv6 routers present
17:20:43 [ 63.319892] ETH03.50: no IPv6 routers present
17:20:43 [ 63.319900] dummy1: no IPv6 routers present
17:20:43 [ 63.463743] ETH03.99: no IPv6 routers present
17:20:43 [ 63.527674] ETH03.555: no IPv6 routers present
17:21:26 [ 106.679333] u32 classifier
17:21:26 [ 106.679339] Performance counters on
17:21:26 [ 106.679342] input device check on
17:21:26 [ 106.679345] Actions configured