www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Multiple APs on the same host issue

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Wireless Networks
View previous topic :: View next topic  
Author Message
iulyb



Joined: 02 Jun 2016
Posts: 99

PostPosted: Fri Oct 21, 2016 8:37 pm    Post subject: Multiple APs on the same host issue Reply with quote

Hi,
I am trying to setup an AP with 2 interfaces, one in 2.4g N and one in 5g AC.
After applying the patch I did myself for the 5G I can register 1 card as AP but I can't do it for the second one that for some reason second card wants only to be a client.

Code:
root@zs ~> iwconfig WLAN00
WLAN00    IEEE 802.11abgn  Mode:Master  Tx-Power=21 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
root@zs ~> iwconfig WLAN03
WLAN03    IEEE 802.11abgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


I have other isues with the WLE600 so I wonder if somebody was successful in setting up 2 cards as APs.[/code]
Back to top
View user's profile Send private message
dixita



Joined: 05 Jun 2017
Posts: 8

PostPosted: Mon Jun 05, 2017 9:49 am    Post subject: For ARM you can go through like this Reply with quote

1. Select Configuration> All Profiles. The All Profile Management window opens.
2. Select RF Managementto expand the RF Management section.
3. Select Adaptive Radio Management (ARM) Profile. Any currently defined ARM profiles appears in the right pane of the window. If you have not yet created any ARM profiles, this pane displays the default profile only.
4. To create a new profile with all default settings, enter a name in the entry blank. The name must be 163 characters, and can be composed of alphanumeric characters, special characters and spaces. If your profile name includes a space, it must be enclosed within quotation marks.
5. Click Add.
To create a new ARM profile via the command-line interface, access the CLI in config mode and issue the following command.
Back to top
View user's profile Send private message
iulyb



Joined: 02 Jun 2016
Posts: 99

PostPosted: Mon Jun 05, 2017 3:41 pm    Post subject: Reply with quote

Hi,
Thanks for reply, I have an APU and since then I figure out, I actually did a tutorial and some patches for 5G.
The main culprit were wrong firmware file, and hostap version so I compiled a newer version in order to support AC.
Also the support for 5G is wrong, my patches address some of this.
http://www.zeroshell.org/forum/viewtopic.php?t=7143

The menu you are talking about is missing in normal 3.7.1 release. This means that some integration work should be done in order to bring both releases on the same page.
Back to top
View user's profile Send private message
dixita



Joined: 05 Jun 2017
Posts: 8

PostPosted: Tue Jun 20, 2017 9:40 am    Post subject: Reply with quote

Hello i m facing same issue for trying AP with 2 interfaces. i had follow your above steps but it still not working.. any one can help???
Dixita Patel
http://scrpro.org/iphone-screen-recorder/
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Wireless Networks All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group